3rd Workshop on Calibration of ITER Neutron Diagnostics

5 Oct 2022, 08:00 → 7 Oct 2022, 17:30 Europe/Paris

IC Meeting room (72/5010) ( ITER Site)

Chair: Bruno Coriton (ITER), Co-Chair: Dmitry Gin, Co-Chair: Jan Dankowski, Co-Chair: Silvia di Sarra, Co-Chair: Vitaly Krasilnikov (ITER Organization), Scientific Secretary: Federico Curiano

A suite of neutron diagnostics is being designed and manufactured by the Domestic Agencies (DAs). Following First Plasma (FP) and as ITER ramps up toward Fusion Power Operation (FPO), the neutron diagnostics will be integrated to the tokamak and will become progressively functional. Accuracy of 10% is demanded to the absolute measurement of the fusion power on ITER. To achieve this accuracy,  a comprehensive strategy involving characterization of the detectors by the DAs, in-vessel neutron diagnostic calibration, diagnostic cross-calibration using reference plasma shots, neutron transport calculations and synthetic measurement simulations must be carefully planned and carried out. This workshop aims at gathering experts in neutron diagnostic, metrology, simulation and modeling in order to advise the ITER Organization (IO) on the calibration procedures of the ITER neutron diagnostics. 

---

Registrations for on-site participation are closed.
For remote attendance, please contact Bruno Coriton and Julie Juif.

2013 Workshop Report

2015 Workshorp Report

Wednesday, 5 October

Session I: Introduction and Overview

Convener: Bruno Coriton (ITER)

1 Welcome Address

Speaker: Michael Walsh (ITER)

Talk

2 Workshop Overview and Objectives

Speaker: Bruno Coriton (ITER)

Talk

3 Overview of ITER Neutron Diagnostic Calibration - Lessons Learned from The Previous Workshops

Speaker: Vitaly Krasilnikov (ITER)

2013 Workshop Report

2015 Workshop Report

Talk

09:55 Coffee Break

Session II: Reports on Diagnostic Accuracy, Pre-Installation Calibration and Characterization Plans by the DAs (Chair: Peter Stott)

Convener: Vitaly Krasilnikov (ITER)

4 Divertor Neutron Flux Monitors (DNFM)

Speaker: Timofey Kormilitsyn (ITER RF DA)

Talk

5 Activities on Calibration of ITER Neutron Flux Monitoring (NFM) System

Speaker: Guoliang Yuan (SWIP / ITER CN DA)

Talk

6 Detector Characterization Plan for 55.B3 Microfission Chamber (MFC)

Speaker: Masao Ishikawa (QST / ITER JA DA)

Abstract

Talk

7 Calibration Strategy of the ITER Spectrometers (HRNS)

Speaker: Anders Hjalmarsson (Uppsala University)

Talk

12:05 Lunch Break

8 ITER NAS Target Accuracy and Error Sources

Speaker: Jungmin Jo (KFE / ITER KO DA)

Talk

9 Pre-Delivery Calibration Strategy of the ITER Radial Neutron Camera (RNC)

Speaker: Daniele Marocco (ENEA / ITER EU DA)

Abstract

Talk

10 Calibration strategy of the ITER Vertical Neutron Camera (VNC)

Speaker: Grigorii Nemtsev (ITER RF DA)

Abstract

Talk

14:50 Coffee Break

11 Session II - Discussion

15:55 Short Break

Session III: Experience and Lessons Learned at Other Fusion Facilities (Chair: Marek Scholz)

Convener: Jan Dankowski (ITER)

12 Diagnostic Experience with DT Fusion Neutrons on TFTR

Speaker: Ken Young (PPPL)

Talk

13 Activation Measurements and Modelling on MAST Upgrade

Speaker: Marco Cecconello (Uppsala University)

Abstract

Talk

14 Neutron Diagnostic Calibration at JET

Speaker: Zamir Ghani (UKAEA)

15 Session III - Discussion & Preliminary Recommendations to IO

16 Day 1 - Closing Remarks

Thursday, 6 October

Session IV: In-Vessel Neutron Calibration (IVNC) Planning and Cross-Calibration Considerations (Chair: Basilio Esposito)

Convener: Dmitry Gin (ITER)

17 Day 2 Opening

18 IVNC Campaigns - Planning, Progress and Challenges

Speaker: Silvia di Sarra (ITER)

Talk

19 The Agile Robot Transporter for ITER Diagnostic Calibration

Speaker: Raphael Hery (ITER)

Talk

20 Neutron Generator Development for ITER IVNC

Speaker: Timofey Kormilitsyn (ITER RF DA)

Talk

10:20 Coffee Break

21 In-vessel Calibration of JET Neutron Diagnostics - Results and Experience Gained during Calibration of the Neutron Activation System

Speaker: Ewa Laszynska (IPPLM)

Abstract

Talk

22 Calorimetry Measurements for Cross-Calibration of Neutron Diagnostics

Speaker: Lukasz Tomkow (ITER)

Abstract

Talk

23 Session IV - Discussion

12:05 Lunch Break

Session V: ITER Neutron Transport Calculations (Chair: Michael Loughlin)

Convener: Silvia di Sarra (ITER)

24 Session Objectives

25 Neutronic Calculations for the Planning of the In-Vessel Neutron Calibration Campaigns

Speaker: Takeo Nishitani (Nagoya University)

Abstract

Talk

26 Simulations in Support of Planning and Execution of JET Neutron Yield Calibrations

Speaker: Aljaz Cufar (JSI)

Talk

14:15 Coffee Break

27 MCNP Model of the RNC Integrated in the ITER Equatortial Port 1 Model

Speaker: Fabio Moro (ENEA)

Abstract

Talk

28 E-lite 360-deg Neutronics Model of the ITER Tokamak

Speaker: Gabriel Pedroche (UNED)

Abstract

Talk

29 Session V - Discussion

16:10 Short Break

Session VI: Calibration, Simulation and Measurement Accuracy (Chair: Göran Ericsson)

Convener: Bruno Coriton (ITER)

30 Modelling Realistic Neutron & Gamma Sources in Fusion Plasma

Speakers: Andrej Zohar (JSI), Ziga Stancar (UKAEA)

Abstract

Talk

31 Evaluating the Fusion Power Accuracy using Synthetic Measurement Simulations

Speaker: Andrei Kovalev (ITER RF DA)

Abstract

Talk

32 Session VI - Discussion

33 Day 2 Closing Remarks

34 Dinner at the Aquabellla Hotel in Aix-en-Provence

Friday, 7 October

Session VII: Summary and Conclusions of the Workshop

35 Forewords

Speaker: Bruno Coriton (ITER)

36 Recommendations to IO from the Participants - Day I (Moderator: R. Reichle)

Speaker: Session Chairs

09:55 Coffee Break

37 Recommendations to IO from the Participants - Day II (Moderator: R. Reichle)

Speaker: Session Chairs

38 Open Discussion for All and Report Preparation (Moderators: V. Krasilnikov, F. Curiano)

Speaker: All

39 Closing Remarks

Speaker: All

40 ITER Platform Site Tour