3rd Workshop on Calibration of ITER Neutron Diagnostics

5 Oct 2022, 08:00 → 7 Oct 2022, 17:30 Europe/Paris

IC Meeting room (72/5010) ( ITER Site)

Chair: Bruno Coriton (ITER), Co-Chair: Dmitry Gin, Co-Chair: Jan Dankowski, Co-Chair: Silvia di Sarra, Co-Chair: Vitaly Krasilnikov (ITER Organization), Scientific Secretary: Federico Curiano

A suite of neutron diagnostics is being designed and manufactured by the Domestic Agencies (DAs). Following First Plasma (FP) and as ITER ramps up toward Fusion Power Operation (FPO), the neutron diagnostics will be integrated to the tokamak and will become progressively functional. Accuracy of 10% is demanded to the absolute measurement of the fusion power on ITER. To achieve this accuracy,  a comprehensive strategy involving characterization of the detectors by the DAs, in-vessel neutron diagnostic calibration, diagnostic cross-calibration using reference plasma shots, neutron transport calculations and synthetic measurement simulations must be carefully planned and carried out. This workshop aims at gathering experts in neutron diagnostic, metrology, simulation and modeling in order to advise the ITER Organization (IO) on the calibration procedures of the ITER neutron diagnostics. 

---

Registrations for on-site participation are closed.
For remote attendance, please contact Bruno Coriton and Julie Juif.

2013 Workshop Report

2015 Workshorp Report

Wednesday, 5 October ¶

09:00 → 10:10 Session I: Introduction and Overview¶

Convener: Bruno Coriton (ITER)

09:00 Welcome Address¶

Speaker: Michael Walsh (ITER)

Talk

09:10 Workshop Overview and Objectives¶

Speaker: Bruno Coriton (ITER)

Talk

09:30 Overview of ITER Neutron Diagnostic Calibration - Lessons Learned from The Previous Workshops¶

Speaker: Vitaly Krasilnikov (ITER)

2013 Workshop Report

2015 Workshop Report

Talk

09:55 Coffee Break

10:10 → 16:00 Session II: Reports on Diagnostic Accuracy, Pre-Installation Calibration and Characterization Plans by the DAs (Chair: Peter Stott)¶

Convener: Vitaly Krasilnikov (ITER)

10:10 Divertor Neutron Flux Monitors (DNFM)¶

Speaker: Timofey Kormilitsyn (ITER RF DA)

Talk

10:40 Activities on Calibration of ITER Neutron Flux Monitoring (NFM) System¶

Speaker: Guoliang Yuan (SWIP / ITER CN DA)

Talk

11:10 Detector Characterization Plan for 55.B3 Microfission Chamber (MFC)¶

Speaker: Masao Ishikawa (QST / ITER JA DA)

Abstract

Talk

11:40 Calibration Strategy of the ITER Spectrometers (HRNS)¶

Speaker: Anders Hjalmarsson (Uppsala University)

Talk

12:05 Lunch Break

13:20 ITER NAS Target Accuracy and Error Sources¶

Speaker: Jungmin Jo (KFE / ITER KO DA)

Talk

13:50 Pre-Delivery Calibration Strategy of the ITER Radial Neutron Camera (RNC)¶

Speaker: Daniele Marocco (ENEA / ITER EU DA)

Abstract

Talk

14:20 Calibration strategy of the ITER Vertical Neutron Camera (VNC)¶

Speaker: Grigorii Nemtsev (ITER RF DA)

Abstract

Talk

14:50 Coffee Break

15:05 Session II - Discussion¶

15:55 Short Break

16:00 → 18:00 Session III: Experience and Lessons Learned at Other Fusion Facilities (Chair: Marek Scholz)¶

Convener: Jan Dankowski (ITER)

16:00 Diagnostic Experience with DT Fusion Neutrons on TFTR¶

Speaker: Ken Young (PPPL)

Talk

16:30 Activation Measurements and Modelling on MAST Upgrade¶

Speaker: Marco Cecconello (Uppsala University)

Abstract

Talk

16:50 Neutron Diagnostic Calibration at JET¶

Speaker: Zamir Ghani (UKAEA)

17:10 Session III - Discussion & Preliminary Recommendations to IO¶

17:50 Day 1 - Closing Remarks¶

Thursday, 6 October ¶

09:00 → 13:20 Session IV: In-Vessel Neutron Calibration (IVNC) Planning and Cross-Calibration Considerations (Chair: Basilio Esposito)¶

Convener: Dmitry Gin (ITER)

09:00 Day 2 Opening¶

09:10 IVNC Campaigns - Planning, Progress and Challenges¶

Speaker: Silvia di Sarra (ITER)

Talk

09:35 The Agile Robot Transporter for ITER Diagnostic Calibration¶

Speaker: Raphael Hery (ITER)

Talk

09:55 Neutron Generator Development for ITER IVNC¶

Speaker: Timofey Kormilitsyn (ITER RF DA)

Talk

10:20 Coffee Break

10:35 In-vessel Calibration of JET Neutron Diagnostics - Results and Experience Gained during Calibration of the Neutron Activation System¶

Speaker: Ewa Laszynska (IPPLM)

Abstract

Talk

11:00 Calorimetry Measurements for Cross-Calibration of Neutron Diagnostics¶

Speaker: Lukasz Tomkow (ITER)

Abstract

Talk

11:20 Session IV - Discussion¶

12:05 Lunch Break

13:20 → 16:15 Session V: ITER Neutron Transport Calculations (Chair: Michael Loughlin)¶

Convener: Silvia di Sarra (ITER)

13:20 Session Objectives¶

13:25 Neutronic Calculations for the Planning of the In-Vessel Neutron Calibration Campaigns¶

Speaker: Takeo Nishitani (Nagoya University)

Abstract

Talk

13:50 Simulations in Support of Planning and Execution of JET Neutron Yield Calibrations¶

Speaker: Aljaz Cufar (JSI)

Talk

14:15 Coffee Break

14:30 MCNP Model of the RNC Integrated in the ITER Equatortial Port 1 Model¶

Speaker: Fabio Moro (ENEA)

Abstract

Talk

14:55 E-lite 360-deg Neutronics Model of the ITER Tokamak¶

Speaker: Gabriel Pedroche (UNED)

Abstract

Talk

15:20 Session V - Discussion¶

16:10 Short Break

16:15 → 18:00 Session VI: Calibration, Simulation and Measurement Accuracy (Chair: Göran Ericsson)¶

Convener: Bruno Coriton (ITER)

16:15 Modelling Realistic Neutron & Gamma Sources in Fusion Plasma¶

Speakers: Andrej Zohar (JSI), Ziga Stancar (UKAEA)

Abstract

Talk

16:40 Evaluating the Fusion Power Accuracy using Synthetic Measurement Simulations¶

Speaker: Andrei Kovalev (ITER RF DA)

Abstract

Talk

17:05 Session VI - Discussion¶

17:50 Day 2 Closing Remarks¶

20:00 → 22:00 Dinner at the Aquabellla Hotel in Aix-en-Provence¶

Friday, 7 October ¶

09:00 → 12:50 Session VII: Summary and Conclusions of the Workshop¶

09:00 Forewords¶

Speaker: Bruno Coriton (ITER)

09:10 Recommendations to IO from the Participants - Day I (Moderator: R. Reichle)¶

Speaker: Session Chairs

09:55 Coffee Break

10:20 Recommendations to IO from the Participants - Day II (Moderator: R. Reichle)¶

Speaker: Session Chairs

11:05 Open Discussion for All and Report Preparation (Moderators: V. Krasilnikov, F. Curiano)¶

Speaker: All

11:50 Closing Remarks¶

Speaker: All

14:00 → 16:00 ITER Platform Site Tour¶