Name: CHATS on Applied Superconductivity 2021
Start: 2021-09-20T12:00:00+02:00
End: 2021-09-24T15:30:00+02:00
Location: Virtual

CHATS on Applied Superconductivity 2021

from Monday 20 September 2021 (12:00) to Friday 24 September 2021 (15:30)

Monday 20 September 2021 ¶

12:00

12:00 - 12:25
12:25
12:25 - 13:40
Contributions

12:25 Thermal Analysis of He II-cooled Nb3Sn Superconducting Coil Samples for the HL-LHC Particle Accelerator Project

12:50 Sensitivity analysis on material properties in mechanical analysis of YBCO tapes during axial and transverse loading

13:15 Electro-mechanical modeling of the fusion cables
13:40 Break
Break
13:40 - 13:50
13:50
13:50 - 15:30
Contributions

13:50 JT-60SA TF Coils Quench Model and Analysis: Joule Energy Estimation with SuperMagnet and STREAM

14:15 Numerical analysis of quench behavior in a Cable-In-Conduit-Conductor cooled by stagnant superfluid helium

14:40 Multiphysics modelling of a sub-sized HTS fusion conductor cable concept

15:05 Methodological aspects of adequate modeling of the quenching process in insulated and non-insulated REBCO-tape-wound multi-double-pancake high-field magnets
Tuesday 21 September 2021 ¶
12:00
12:00 - 12:50
Contributions

12:00 H4C analysis of quench propagation experiments in HTS Cable-In-Conduit Conductors

12:25 Complementary Analysis and Modelling on superconducting JT-60SA TFC conductor
12:50
12:50 - 15:30
Contributions

12:50 Calculation of saturated coupling loss in Rutherford cables

13:15 Preliminary design of the pressure relief system for the new EDIPO He vessel

13:50 TACTICS: overview of a multi-physic analysis tool for fusion magnet design and application to DEMO TF coil

14:15 Development of a multi-physic platform OLYMPE for magnet fusion design: progresses update and applications

14:40 Dynamic simulation of high transients in forced flow Supercritical helium loop for the sizing of an experimental set-up dedicated to the study of loss of vacuum.

15:05 Friction factor of a forced-flow cooled HTS subsize-conductor for fusion magnets
Wednesday 22 September 2021 ¶
12:00
12:00 - 14:40
Contributions

12:00 Thermal-Hydraulic Analysis of the DEMO PF Coils Designed by CEA

12:25 Development of an integrated Cast3M mesh generator in TACTICS

12:50 Parametric study and optimization of the cryo-magnetic system for EU DEMO at the pre-conceptual design phase

13:15 Stability Analysis of ITER Central Solenoid During Plasma Scenario

13:50 Multiphysics Finite Element Modelling of “close-to-real” coil winding of a Toroidal Field Coil in a Tokamak

14:15 New single coupling loss time constant scaling relation for CICC conductors subjected to fusion magnet conditions
14:40
14:40 - 15:30
Contributions

14:40 Analysis of current distribution and AC losses in a RW2 prototype cable for the European DEMO TF coils

15:05 Analytical modeling of coupling losses in CICCs, extensive study of the COLISEUM model
Thursday 23 September 2021 ¶
12:00
12:00 - 13:40
Contributions

12:00 A Numerical Investigation on AC Losses in one module of the Central Solenoid of the ITER tokamak

12:25 Design Studies, Magnetic and Structural calculations for a DEMO hybrid CS proposal

12:50 Numerical Studies of High Field-Rate Losses in Cable-In-Conduit-Conductors Carrying Transport Current

13:15 High-performance multiphysics FEM simulations in the Sparselizard open source library
13:40 Break
Break
13:40 - 13:50
13:50
13:50 - 15:30
Contributions

13:50 Superconductor Thermohydraulical and Resistive Electrical Analytical Model (STREAM) applied to WEST TF Coil Quench Analysis

14:15 AC losses in TF magnets during JT-60SA commissioning: experimental analysis and simulations

14:40 Dynamic simulation of the first cool down of the JT-60SA cryo-magnet system

15:05 OPENSC2: the thermal-hydraulic modelling of superconducting cables moves towards Open Science
Friday 24 September 2021 ¶
12:00
12:00 - 13:40
Contributions

12:00 Improving the SuperMagnet model; recent developments and future activities

12:25 Development and test of a dynamic Modelica model of the He refrigerator for superconducting magnet systems

12:50 Performance assessment of multi-tube He II/He II heat exchanger using a single tube sample

13:15 Analysis of Current Distribution in Rutherford Cables for Accelerator Magnets as an Engineering Tool
13:40 Break
Break
13:40 - 13:50

13:50

13:50 - 14:15

14:15

14:15 - 15:00